Jackson AJX Series Installation, Operation And Service Manual page 39

Conveyor dishmachines
Hide thumbs Also See for AJX Series:
Table of Contents

Advertisement

OPERATION
CLEANING
For machines with
pre-wash sections, also
remove and clean the
pre-wash arm.
Do NOT clean the
machine with any type
of metallic scrubbing
sponge!
07610-003-60-98-L
5. As needed, clean the wash and rinse arms:
a. Remove wash arm manifolds.
b. Remove end-caps from arms and manifolds.
c. Clean nozzles with a brush. Also clean rinse assembly nozzles.
d. Use a small wire or toothpick to remove remaining debris or lime deposits from
nozzles.
e. Flush arms with water.
f. Replace end-caps and ensure they have been tightened.
g. Replace wash arm manifolds.
The outside of the
machine
cleaner. Do not attempt to clean inside any compartments, boxes, or chambers that are
secured with a cover. These normally contain live electrical components.
OPERATING INSTRUCTIONS
should be cleaned with a standard countertop or general
31

Advertisement

Table of Contents
loading

Table of Contents