System Connection; Accessories; Connection Of The System Accessories; Xd-Series (En - Kenwood XD-552 Instruction Manual

System connection

8

Accessories

FM indoor antenna
(1)
AC plug adaptor (1)
Use to adapt the plug on the power cord to
the shape of the wall outlet.
(Accessory only for regions where use is
necesary.)
Unpacking
Unpack the unit carefully and make sure that all accessories
are put aside so they will not be lost.
Examine the unit for any possibility of shipping damage. If
your unit is damaged or fails to operate, notify your dealer
immediately. If your unit was shipped to you directly, notify
the shipping company without delay. Only the consignee
(the person or company receiving the unit) can file a claim
against the carrier for shipping damage.
We recommend that you retain the original carton and
packing materials for use should you transport or ship the
unit in the future.
Keep this manual handy for future reference.

Connection of the System Accessories

CAUTION Note on Connection
Connect the components as shown in the diagram.Only plug the power cord into a power outlet once connections
are completed. The rear panel configuration is variable depending on the models (countries or area).
FM indoor antenna
The accessory antenna is for temporary indoor use
only. For stable signal reception we recommend us-
ing an outdoor antenna. Remove the indoor antenna
if you connect one outdoors.
1 Connect to the antenna terminal.
2 Locate the position providing good recep-
tion condition.
3 Fix the antenna.
ANTENNA
FM
75
GND
AM
AM loop antenna
(1)
Remote control unit
(1)
Speaker cords (2)
Provided in the speaker package
AM loop antenna
The supplied antenna is for indoor use. Place it as far
as possible from the main system, TV set, speaker
cords and power cord, and set it to a direction which
provides the best reception.
ANTENNA
FM
75
GND
AM
1 2

XD-SERIES (En)

Batteries (R6/AA)
(2)
Assemble.
3