Receiving Broadcast Station - Kenwood XD-552 Instruction Manual

26

Receiving broadcast station

It is also possible to receive them by one-touch
operations by storing up to 30 stations in the pre-
set memory.
4 ¢
BAND
TUNING MODE
BAND
TUNING MODE
1 TUNING ¡
One-by-one presetting
1. Select the broadcast band.
Each press changes the band.
1 1
1 FM
2 AM
÷The broadcast bands are variable depending on the model (country or area).
2. Selecting the tuning mode
Each press alternates the mode.
"Auto" (Auto tuning)
2 2
"P.call" (Preset call)
"Manual" (Manual tuning)
3. Select a station.
When no stations have been memorized
Auto tuning
3 3
Manual tuning : Turn the MULTI CONTROL jog dial to select a station.
When the BAND key is pressed, this unit
will be switched on automatically.
Collective presetting of stations
3 3
1 FM
or
2 MW (AM)
3 LW
: Turn the MULTI CONTROL jog dial to receive the next
tuned station automatically.
(On the remote control unit, press the 1 or ¡ key.)
(On the remote control unit, press the 1 or ¡ key.)
Let's put out some sound
XD-SERIES (En)
1 1
2 2
1 FM
or
2 MW (AM)
3 SW
÷ When no operation has been
performed for 5 seconds while
"P.call" is displayed, the tuning
mode is set automatically to
"AUTO".