Flow Control; Data Call Type - ADTRAN 3000 User Manual

Flow Control

Allows communication devices (for example, the Express 3000
and a PC) to deal with one device sending data at a rate higher
than the other device.
Hardware
Software
No Control

Data Call Type

Selects the Call Type according to the ISDN line configuration.
Speech
Audio
Data 56kbps Directs call control software to request a 64 kbps data
Data 64kbps Instructs call control software to request an unrestrict-
61203153L2-20
Chapter 3. Using the Express Configuration Program
Controls the data transmission between the terminal
(PC) and the Express 3000 (via EIA-232 pins). Recom-
mended for high-speed data transmission.
Uses characters embedded in the communication soft-
ware to control the data transmission. The control
characters are known as XON/XOFF. Typically used
in slower transmission of data.
Disables any type of flow control.
Directs call control software to request a Speech circuit
as the bearer capability for outgoing calls. Use with
ISDN lines configured for voice service. In some areas
voice service is less expensive than data service. A
Speech call type does not guarantee an end-to-end
digital connection with some local and long distance
carriers.
Directs call control software to request a 3.1 kHz Au-
dio circuit as the bearer capability for outgoing calls.
Used with an ISDN line configured for voice service.
In some areas audio service is less expensive than data
service. An Audio call type does not guarantee an end-
to-end digital connection with some local and long
distance carriers.
circuit that is rate-adapted down to 56 kbps.
ed 64 kbps data circuit. (Default for the Express 3000.)
Express 3000 User Manual 3-13