Total Access 1240 Installation and Maintenance Practice
Password Control Menu
The Password Control menu (see
times, and restore default passwords.
Unacknowledged Alarms: None
The Password Control menu options are shown in
Option
Description
1
Set Passwords
2
Allow SNMP security
management
3
Set Idle Logout Time
4
Restore Default Passwords
When the Restore Default Passwords option is selected, the pass-
word controls automatically restore to the default setting without
additional prompting.
5-36
Figure
5-24) is used to set and modify passwords, logout
Total Access 1240 - IPoE Fed
Password Control
1. Set Passwords
2. Allow SNMP security management
3. Set Idle Logout Time
4. Restore Default Passwords
Selection :
'?' - System Help Screen
Figure 5-24. Password Control Menu
Table 5-28. Password Control Menu Options
Function
This option displays the
Screen"
This option is used to enable or disable SNMP security
management.
This option is used to set the time allowed before an
automatic logout is performed. This option must be set
between 1 and 60 minutes.
This option is used to restore all passwords to the
default settings.
CAUTION
None Configured
Disabled
10
minutes
Table
5-28.
"Password Control Levels
on page 5-37.
61179605L5-5B