Installing The Express 3000: Windows 95/98 - ADTRAN 3000 User Manual

Installing the Express 3000: Windows 95/98

Before you can use the Express 3000, your PC must recognize the unit
and communicate with it (i.e., the unit must be "installed" into the sys-
tem). Windows 95/98 systems automatically detect the presence of
new hardware and search for the driver that allows this communica-
tion. When the driver is located, Windows installs it and the unit is
ready to use. (The Express 3000 CD that came with your unit contains
the appropriate driver that allows the Express 3000 and your PC to
communicate.) Follow the instructions in the Step/Action table below
to install the unit.
Windows 95/98 Express 3000 Installation Procedure
Step
1 If you haven't already done so, insert the Express 3000 CD
into the CD-ROM drive. (The Express 3000 CD launches
automatically, and the Windows 95/98 operating systems
detect and install the necessary driver for installing the
Express 3000 into the system.)
2
When the ADTRAN Installation Helper runs, go to the
instructions Installing the Express Configuration Software:
Windows on page 2-4.
61203153L2-20
Alternatively, you can launch the CD by double-clicking
on the My Computer icon and then on the icon for the
drive labelled Express 3000.
Express 3000 User Manual
Chapter 2. Setting Up the Express 3000
Action
2-3