General Tab; Switch Type; Area Code; Figure 3-3. Isdn Profile Setup Window - ADTRAN 3000 User Manual

Chapter 3. Using the Express Configuration Program

General Tab

The General Tab contains fields for setting ISDN line information such
as switch type, area code, phone numbers 1 and 2, and SPIDs 1 and 2.
In addition, you can disable the automatic detection of SPIDs. Also,
you can enter feature activator codes for conference calling, call trans-
fer, and message waiting.

Switch Type

Defines the switch type for the local version of the software, either
AT&T 5ESS, DMS - 100, National ISDN-1, or NEC Switch. If you
are running the International version of the Express Configura-
tion Wizard, five additional switch types are available: Euro IS-
DN, VN4, NTT, KDD, or TDX. (The telephone company should
provide this information as part of the ISDN Line installation; if
this information is not provided, contact the telephone company.)

Area Code

Sets the area code for the ISDN lines. The area code is the same for
both B channels. Enter the area code only if you plan to use the
AutoSPID algorithm to automatically detect the Switch Type and
SPIDs.
3-8

Figure 3-3. ISDN Profile Setup Window

Express 3000 User Manual 61203153L2-20