System Connection; Antenna Connection; R-Sg7/Dp-Sg7/X-Sg7 (En - Kenwood R-SG7 Instruction Manual

System connection

1. Antenna connection

Connect the antenna as shown in the figure.
Do not plug the power cord into a wall AC outlet until the connection has been completed.
1 2
Connection of the Accessory Antenna
FM indoor antenna
The accessory antenna is for temporary indoor use only.
For stable signal reception we recommend using an out-
door antenna. Remove the indoor antenna if you connect
one outdoors.
FM indoor
antenna
1 Connect it to the antenna terminal.
2 Locate the position providing good
reception condition.
3 Fix the antenna.
In case of bad reception
FM outdoor
antenna
(commercially
available)
FM outdoor antenna
Lead the 75 coaxial cable connected to the FM outdoor
antenna into the room and connect it to the FM 75
termimal.
3
FM75
SPEAKERS
( 6 - 16 )
R L
L
R
Antenna adapter
FM75
(commercially
available)
AM loop antenna
The supplied antenna is for indoor use. Place it as far as
possible from the main system, TV set, speaker cords and
power cord, and set it to a direction which provides the
best reception.
AM
ANTENNA
GND
SUPER
FM75
WOOFER
AM
SYSTEM
PRE OUT
ANTENNA CONTROL
GND
IN IN REC PLAY REC PLAY
CD AUX TAPE MD
AM
GND ANTENNA
System connection

R-SG7/DP-SG7/X-SG7 (EN)

AM loop
antenna
R-SG7
9