Playback Of Tape - Kenwood R-SG7 Instruction Manual

22

Playback of tape

0
1 1
2 3
The tape direction lights
green.
Selection of DOLBY NR
1. Load a cassette tape.
1 Open the tray.
2 Insert a tape and close the
tray.
2. Start playback.
Press the key for the running
direction to be played.
2 2
Selection of reverse mode
1 1
To wind tape at high speed
Reverse side
When the power is ON and a cassette has been set in
advance to the cassette deck, playback will start just
by setting the input selection to TAPE.
Hearing sound
R-SG7/DP-SG7/X-SG7 (EN)
2 2
To stop playback
Side where tape
Top side is exposed
Playback of the Playback of the
reverse side top side