One-Touch Recording Of An Entire Cd; (One Touch Edit - Kenwood R-SG7 Instruction Manual

38

One-touch recording of an entire CD

When the O.T.E. key is pressed while the CD
player is in the stop mode, recording of a CD can
be started at the same time as playback.
When the DM-SG7 (option) is connected and
the input selector is set to "MD", the same pro-
cedure can be used to make a one-touch record-
ing of the entire MD on tape.
Recording preparations are required. • (Steps 1 to 4)
1
Check that the CD player is in the stop mode.
If it is in play mode
Step 2 also can be executed after the order of the
tracks has been programmed.
2
Press the O.T.E. key.
7
O.T.E.
(ONE TOUCH EDIT.....recording of all tracks)
÷ When recording a CD, set the input selector to CD.
÷ Recording of CD starts at the same time as playback.
÷ When the tape direction is changed at the end of the
tape, no sound is recorded on the guide tape. When
interruption of a track is to be avoided, restart recording
from the very beginning of the reverse side according to
"Recording".
To end recording in the middle
÷ Both the cassette deck and CD player stop.
Convenient CD recording
R-SG7/DP-SG7/X-SG7 (EN)
•
7