Kenwood R-SG7 Instruction Manual page 15

Receiver R-SG7
1
(on/standby) key
The power is switched ON and OFF (standby). At the
time of system connection, the power is switched ON
and OFF for the entire system.
2 "phones" jack
Headphones with a stereo mini plug (optional) can be
connected.
3 "volume control" knob
Normally, this is used to adjust the volume. It is also
used for timer reservation and clock setting.
4 Pure A indicator
This lights at the time of pure A mode.
5 "pure A" key
When the power is ON : Switches Pure A mode ON/
When the power is OFF : Switches A.P.S. (auto power
6 "N.B./tone" key
This is used for bass and treble compensation.
Cassete deck X-SG7
1 Tape tray
This houses the cassette tape.
2
(on/standby) key/Standby indicator
The power is switched ON and OFF (standby). This is
not used in case of system connection.
3 Dolby NR key/indicators
Dolby noise reduction ON/OFF switching is executed.
4 Playback keys (2 3)/Operation indicator ™
During stop and pause: the tape direction lights red.
During playback and recording: the tape direction lights
green.
During fast forward and rewind: the tape direction
flashes green.
5 Open/Close key (0)
This opens the tape tray for tape insertion and removal.
CD player DP-SG7
1 Disc tray
One disc can be stored.
2 Remote control sensor
This is not used with system connection.
3
(on/standby) key
The power is switched ON and OFF (standby). This is
not used with system connection.
4 Open/Close key (0)
*
(
*
e
(e
OFF.
save) ON/OFF.
(
™
£
™
)
)
7 "enter" key
This key is used in many operations including the tone
adjustment, station presetting, clock adjustment and
timer setting.
8 "input selector" key
This selects the input source. When TAPE, CD, or MD
is selected and a tape or disc already has been set,
playback starts automatically.
9 "tuning" (% fi) key
When the power is ON : Used for station tuning.
When the power is OFF : Used for timer reservation.
0 "band" key
When the power is ON : Reception band switching.
When the power is OFF : Used for timer reservation.
! "auto/mono" key
When the power is ON : The tuning mode is switched.
When the power is OFF : Used for clock setting.
@ Remote control sensor
This is used with the R-SG7 system remote control
(RC-R0713E).
6 Stop (7) key
7 Pause (8) key/indicator
8 Record (¶) key/indicator
Recording is started. When this switch is pressed
during recording, an unrecorded (blank) portion of
about 4 sec is produced and then the tape stops.
9 Fast forward and rewind (1 ¡) keys £
0
rev. mode key/indicator
" "
The reverse mode of the deck (both sides, one side) is
switched.
! CRLS key/indicator
The recording level is set automatically according to the
sound source being recorded.
The disc tray is opened and closed.
5 Playback/Pause key (6)
6 "repeat" key
This is used for repeated playback of a CD.
7 Stop (7) key
8 Skip (4 ¢) key
9 Fast forward, rewind (1 ¡) key
0 "time" key
The CD time display is switched.
!
space key
" "
During program playback, a silent part of several
seconds is produced between tracks.
Controls and indicators
R-SG7/DP-SG7/X-SG7 (EN)
(¶r
*
§ti
%key: Program ON/OFF
fikey: O.T.T. reservation
§i
§r
&
£
£
•
£
º
)
‹
¡
¡
¡
¡
¤
15