Radio Data System) - Kenwood R-SG7 Instruction Manual

R.D.S.

(Radio Data System)

RDS is a system which transmits useful
information (digital data) for FM broadcasts
together with the broadcast signal. Tuners and
receivers designed for RDS reception can extract
the information from the broadcast signal for use
with various functions such as automatic display
of the station name.
This unit is equipped with the following
functions utilizing RDS data:
PTY (Program Type Identification) Search :‚
The tuner automatically searches for a station which is
currently broadcasting a specified program type (genre).
PS (Program Service Name) Display :
When an RDS broadcast is received, the station name is
automatically displayed.
EON (Enhanced Other Network) :
When the information to be received is set in advance and
any RDS station in the same network starts broadcasting
of such information, the reception automatically will be
switched to that station.
To switch the display contents
Pressing the DISPLAY key
changes the display contents.
(See below.)
w
RDS
DISPLAY
For reception of RDS stations, the RDS auto
presetting function must be used to preset the
stations.
"NO DATA" will be flashed when a station not
preset by auto presetting is received.
Lights
AUTO ST. TUNED RDS
B B C 1
The "RDS" indicator lights up when
an RDS broadcast (signal) is received.
* Some functions may not be provided or be given
different names depending on countries or areas.
Display mode priority ranking
1 PS (Program Service Name) Display :
When an RDS broadcast is received, the
station name is automatically displayed.
If no PS data was sent, "NO PS" is dis
played.
AUTO ST. TUNED
B B C
2 Frequency Display :
The frequency of the current station is displayed.
AUTO ST. TUNED
F M 1 ) 2 5 )
R.D.S.
R-SG7/DP-SG7/X-SG7 (EN)
¶
F M
RDS
1 F M
RDS
.
MHz
39