Xylem LOWARA e-SVE Installation, Operation And Maintenance Manual page 35

P05. Operating time months
This parameter shows the amount of months of total operating time (drive supplied with power),
to be added to P06.
P06. Operating time hours
This parameter shows the amount of hours of total operating time, to be added to P05.
P07. Motor Time Months
This parameter shows the amount of months of motor operating time, to be added to P08.
P08. Motor time hours
This parameter shows the amount of hours of motor operating time, to be added to P07.
ST
P09. 1 ERROR
This parameter holds the last error happened. The information displayed switches through the
values:
 (Exx): xx reports the error code
 (Hyy): yy is the value of hours referred to P05-P06 when the error Exx happened
 (Dww):ww is the value of days referred to P05-P06 when the error Exx happened
 (Uzz): zz is the value of weeks referred to P05-P06 when the error Exx happened
Example of visualization:
E04
ND
P10. 2 ERROR
This parameter holds the second error happened. The information displayed switches through
the values:
 (Exx): xx reports the error code
 (Hyy): yy is the value of hours referred to P05-P06 when the error Exx happened
 (Dww):ww is the value of days referred to P05-P06 when the error Exx happened
 (Uzz): zz is the value of weeks referred to P05-P06 when the error Exx happened
See P09 for a visualization example.
RD
P11. 3 ERROR
This parameter holds the third error happened. The information displayed switches through the
values:
 (Exx): xx reports the error code
 (Hyy): yy is the value of hours referred to P05-P06 when the error Exx happened
 (Dww):ww is the value of days referred to P05-P06 when the error Exx happened
 (Uzz): zz is the value of weeks referred to P05-P06 when the error Exx happened
See P09 for a visualization example.
TH
P12. 4 ERROR
This parameter holds the forth error happened. The information displayed switches through the
values:
 (Exx): xx reports the error code
 (Hyy): yy is the value of hours referred to P05-P06 when the error Exx happened
 (Dww):ww is the value of days referred to P05-P06 when the error Exx happened
 (Uzz): zz is the value of weeks referred to P05-P06 when the error Exx happened
See P09 for a visualization example.
P13. Power Module Temperature
This parameter shows the power module temperature, expressed in °C
P14. Inverter Current
This parameter shows the actual current sourced by the frequency converter, expressed in
[Amperes].
 K10  d03  U15
en – Original instructions
35