Control Terminal; Separately Sold Product - Toshiba TLP-WX2200U Owner's Manual

Specifications (Continued)

■ CONTROL terminal

● Pin assignment
Pin No.
7
8 6
5 3
4
2 1
Mini DIN 8 pin connector
● Interface format
1 Communication method RS-232C, 9600bps, No Parity, Data Length: 8 bits;
Stop Bit Length:
2 Communication format STX (02h) Command (3Byte) ETX (03h)
Only 1 command valid per communication.
3 Data format For input commands, only ASCII-compliant all-uppercase
alphanumeric characters supported.
4 Replies Acknowledge
No acknowledge
If commands are to be sent consecutively, wait for the response from the projector
before sending the next command.
● Main Commands
Item Command
Power on PON
Power off POF
Icon display on MO0
Icon display off MO1
Auto setting (RGB input) PAT
Status display on DON
Status display off DOF
Note
• Contact your dealer for control cable and other commands.

■ Separately sold product

Replacement Lamp Model TLPLW11
Signal Name Description
1 RXD Receiving data
2 CTS Consent to send
3 DSR Data set ready
4 GND Signal ground
5 RTS Request to send
6 N.C
No connection
7 TXD Sending data
8 GND Signal ground
1 bit
ACK (06h) CR (0Dh) Data ... Normally ended
ACK (06h) ESC (1Bh) ... Aborted
NAK (15h)
54