Using The Menus; How To Use The Menus - Toshiba TLP-WX2200U Owner's Manual

Using handy features (Continued)
How to set password (from [On] to [Off])
1
Select [Password] in the Default setting 2 menu and press the
button.
The password entry screen is displayed.
2 Enter the password using numeric keys of the remote control.
3
Select [Password setting] in the password registration, setting menu,
and press the or button.
4
Select [OFF].
5
Select [OK] and press the
Note
• While the password setting is [On], the password entry screen will be displayed
only when the power is turned on next time.
button.
34

Using the menus

You can call up on-screen menus, and conduct a number of adjustments and settings using
the operation buttons
or

■ How to use the menus

The menu shown below is for operation instructions purposes and might differ from the
actual display.
1. Press the MENU button
2. Select a Category
Select a category by using
There are following 5 categories:
Image adjustment menu
Display setting menu
Default setting 1 menu
Default setting 2 menu
Status display menu
3. Adjustments & Settings
Item
Adjustment/Setting Value
These marks signify
the items can be
adjusted/set by using
.
These marks signify the items can
be selected from the list by using
.
After an item is selected, apply it by
pressing .
• The figure shows displays given for operation instructions purposes. As the display may differ depending on the item,
use the following pages as a reference.
• To return to previous item, press the RETURN button.
4. End Press the MENU button.
(The menu disappears about 30 seconds after the last operation.)
on the control panel (main unit side) and remote control.
p.16
Display the Setting display menu.
.
p.36
p.38
p.41
p.42
p.43
Press or to open the menu.
These marks
signify that there
are options.
Press or
to display a list of
options.
Toggle items with
Select items with
Fix selection with
35
Displays the current
adjustments and
settings of selected
category.
Item shown with gray
cannot be adjusted with
the current input source.
These marks
signify that
there are setting
screens. Press
or to
display a list of
setting screens.
* When no item is
changed, press .
.
and press .
.