Connection; Label Locations - Toshiba TLP-WX2200U Owner's Manual

Connection

Before connection
• Read the owner's manual of the device you are connecting to the projector.
• Some types of computer cannot be used or connected to this projector.
Check for an RGB output terminal, supported signal
• Turn off the power of both devices before connecting.
• The figure is a sample connection. This does not mean that all of these devices can or
must be connected simultaneously. (Dotted lines mean items can be exchanged.)
Computer
Video recorder,
(for control)
DVD player, etc.
To audio output
White (L)/Red (R)
To
Audio cable
RS-232C
(not supplied)
p.54
terminal
Control cable
AV cable
(not supplied)
To audio
output
To audio input
To video
White (L)/
White (L)/Red (R)
output
Red (R)
Video recorder, etc. Audio amplifier, etc.
p.52 , etc.
Computer Computer
To S-video output
S-video cable
To audio
(not supplied)
output
To RGB
To audio output
Audio cable
output
Audio cable
(not supplied)
(not supplied)
RGB cable
(supplied)
Monitor cable Mini
D-sub 15P-BNC
(not supplied)
Audio cable
To Y/C
(not supplied)
Green (Y)/Blue
Audio cable
(C B
(not supplied)
Conversion
To audio adapter BNC-pin
output (not supplied)
DVD video recorder, etc.
22
Notes
• When COMPUTER 2 IN terminal (also used for MONITOR OUT terminal) is used as
MONITOR OUT terminal, the signal which is input to COMPUTER 1 IN terminal is output.
• Signals are output from MONITOR OUT terminal even in standby mode.
However, from AUDIO OUT terminal, no audio signal is output.
• A computer monitor cannot accept Y/P
• The AUDIO IN terminal doubles for devices connected to COMPUTER 1 terminal and
COMPUTER 2 terminal.
• When an AUDIO OUT terminal is connected, sound is not output from the projector
speaker.
• Output volume of AUDIO OUT terminal can be adjusted by the VOL button.
• Moving pictures played back on computers using DVD software may appear unnatural if it
is projected with this projector, but it is not a malfunction.
To RGB
output

Label locations

RGB cable
(not supplied)
Monitor
It is necessary to
switch to MONITOR
OUT by the switch.
p.18
/C output
B R
)/Red (C R )
Caution – use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
/P signals correctly.
B R
Or
23