Anti-Tip Devices - Invacare Rea Assist Manual

1.
B
A
2.
C
D
REA® ASSIST

ANTI-TIP DEVICES

The anti-tip devices also act as step tubes. They
are height-adjustable and can easily be set in six
different positions as well as a parking position. The
parking position must be used when the wheelchair
is pulled up a kerb or a step. This prevents the anti-
tip devices catching the edge of the kerb or step.
Adjust the anti-tip devices by pressing the spring-
loaded buttons (A) and then raising or lowering
the anti-tip devices until you obtain the required
position.
Ensure that both anti-tip devices are adjusted to the
same position and that the spring-loaded buttons
pop back into place in their new position.
A
Accessories
HEAD REST
1. The height adjustment and removal is operated
2. The angle and depth is adjusted by the two screws
by the handwheel (A). The bar is equipped with a
"memory" stay. Loosen screw (B) adjust and, re-
tighten.
(C) and the handle (D). Loosen, adjust and re-
tighten.
21