Invacare Rea Assist Manual page 25

1.
Tool: 5 mm Allen Key
2.
3.
4.
REA® ASSIST
TRUNKSUPPORT Swing away
It is possible to adjust the height, depth and sideways
position of the trunk support.
1. Adjust the height by fi rst slackening the Allen
screws (A) while simultaneously mov ing bracket
(B) up or down. Re-tighten Allen screws (A).
2. The sideways position of the trunk support is
adjusted by slackening the three screws (C). Next,
move the support sideways until the desired posi-
tion is found and re-tighten screws (C).
3. In order to adjust the depth of the trunk support;
fi rst undo the zipper on the support, to expose
the screws (D). Use a screwdriver to slacken these
and slide the trunk support backwards or forwards.
Re-tighten the screws and do up the zipper.
4. The trunk support can be folded away so that they
do not obstruct the user when he or she gets into
or out of the chair.
25