Toshiba MMU-UP0091HP-E Service Manual page 204

No. Part name
⑥
Fan motor,
2. Attachment
Fan,
1) Screw the fan motor with the motor fixing plate.
(M8 x 20, 2 pcs).
NOTE
Fix the wiring of the motor on the electrical parts
box side as right figure.
2) Attach the earth screw.
3) Put the fan in the fan case.
Attach the nose plate to the original position on the fan
case.
NOTE
Adjust the direction of the fan blade.
4) Insert the fan to the shaft.
5) Tighten the Screw C. (M8 x 20, 8 pcs)
6) Insert the fan to where the shaft of the fan motor stops,
and adjust the flat portion(2 places) ,
then tighten the hexagon head bolt.
NOTE
Check that if the fan rotate smoothly without
touching the fan case.
NOTE
Be sure to use a torque wench for fixing and tighten
with 10.0N
7) Hook the fan assembly on the looser screw B.
8) Tighten the screw A and B.(M8 x 20, 10 pcs)
9) A ferrite core is attached to the wire of a fan motor as
before within an electric part box.
Connect the wires of the fan motor as before, and close
and fix the electrical parts box cover.
Be sure to wire in the electrical parts box as before.
NOTE
When the ferrite core is attached to the earth wire
of a fan motor as below photo, please repairing
work indicated to P94 ~ 97.
Procedure
m
•
Ferrite core attached in earth
lead of motor
- 204 -
Remarks
Electrical
Wiring of
parts box
the motor
Fan blade
flat portion
shaft
flat portion
Hexagonal bolt
Wires of
the fan
motor
CN703
CN704
CN705
Ferrite
core
Ground
screw
Ferrite
core