Trademarks; Precautions For Placement And Use; Notes About Power Supplies; Beware Of Condensation - Tascam 24 Manual

Trademarks

0 TASCAM is a registered trademark of TEAC Corporation.
0 SDXC Logo is a trademark of SD-3C, LLC.
0 The Bluetooth® word mark and logo are the property of Bluetooth
SIG, Inc. and are used by TEAC Corporation with permission.
0 Supply of this product does not convey a license nor imply any right
to distribute MPEG Layer-3 compliant content created with this prod-
uct in revenue-generating broadcast systems (terrestrial, satellite,
cable and/or other distribution channels), streaming applications (via
Internet, intranets and/or other networks), other content distribution
systems (pay-audio or audio-on-demand applications and the like) or
on physical media (compact discs, digital versatile discs, semiconduc-
tor chips, hard drives, memory cards and the like). An independent
license for such use is required. For details, please visit http://mp3li-
censing. com.
0 Other company names, product names and logos in this document
are the trademarks or registered trademarks of their respective
owners.
Information is given about products in this manual only for
the purpose of example and does not indicate any guarantees
against infringements of third-party intellectual property
rights and other rights related to them. TEAC Corporation will
bear no responsibility for infringements on third-party intel-
lectual property rights or other liabilities that occur as a result
of the use of this product.
Properties copyrighted by third parties cannot be used for any
purpose other than personal enjoyment and the like without
the permission of the right holders recognized by copyright
law. Always use this equipment properly.
TEAC Corporation will bear no responsibility for rights
infringements committed by users of this product.

Precautions for placement and use

0 The operating temperature range of this unit is 5–35 °C.
0 Do not install this unit in the following types of locations. Doing so
could make the sound quality worse or cause malfunction.
Locations with frequent vibrations
Next to a window or in another location exposed to direct
sunlight
Near heating equipment or in other locations that become very
hot
Extremely cold places
Places with bad ventilation or high humidity
Very dusty places
0 To enable good heat dissipation, do not place anything on top of the
unit.
0 Do not place this unit on top of a power amplifier or other device
that generates heat.

Notes about power supplies

0 Insert the included power cord all the way into the AC IN connector.
0 Do not connect a power supply other than one that is AC100V
(50-60Hz).
0 Hold the power cord by its plug when connecting or disconnecting
it.

Beware of condensation

Condensation could occur if the unit is moved from a cold place to a
warm place, it is used immediately after a cold room has been heated
or it is otherwise exposed to a sudden temperature change. To prevent
this, or if this occurs, let the unit sit for one or two hours at the new room
temperature before using it.

Cleaning the unit

Use a dry soft cloth to wipe the unit clean. Do not wipe with chemical
cleaning cloths, thinner, alcohol or other chemical agents. Doing so
could damage the surface or cause discoloration.
1 – Introduction
7
TASCAM Model 24