1040 M.2 Solid-State Drive - Lenovo ThinkPad T15 Gen 1 Hardware Maintenance Manual

1040 M.2 solid-state drive

For access, remove these FRUs in order:
• "1010 Removing the nano-SIM card and the nano-SIM-card tray" on page 64
• "1020 Base cover assembly" on page 64
Attention:
• If your computer is installed with a hybrid solid-state drive (with Intel Optane memory), go to
support.lenovo.com/docs/tg_ssd
• The M.2 solid-state drive is sensitive. Inappropriate handling might cause damage and permanent loss of
data.
When handling the M.2 solid-state drive, observe the following guidelines:
• Replace the M.2 solid-state drive only for upgrade or repair. The M.2 solid-state drive is not designed for
frequent changes or replacement.
• Before replacing the M.2 solid-state drive, make a backup copy of all the data that you want to keep.
• Do not apply pressure to the M.2 solid-state drive.
• Do not touch the contact edge or circuit board of the M.2 solid-state drive. Otherwise the M.2 solid-state
drive might get damaged.
• Do not make the M.2 solid-state drive subject to physical shocks or vibration. Put the M.2 solid-state drive
on a soft material, such as cloth, to absorb physical shocks.
Removal steps of the 2282 M.2 solid-state drive
Step Screw (quantity)
1
M2 × 0.5 + 2.5 mm, big-head, nylon-coated (1)
to know the details on how to replace it.
Color Torque
Black 0.181 Nm
(1.85 kgf-cm)
.
Chapter 8 Removing or replacing a FRU
https://
69