1110 Always On Usb 3.2 Connector Gen 1 Cable, Bracket And Board - Lenovo ThinkPad T15 Gen 1 Hardware Maintenance Manual

Removal steps of the thermal fan assembly
When installing:
• Ensure that the fan connectors are attached firmly.
• Do not press the top of the fan cover and the fan hub.
• Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, on
the part marked a and
grease can cause a thermal problem due to imperfect contact with a component.
For models with discrete thermal pipes:
For models with an integrated thermal pipe (for T15 Gen 1 only):

1110 Always On USB 3.2 connector Gen 1 cable, bracket and board

For access, remove these FRUs:
• "1010 Removing the nano-SIM card and the nano-SIM-card tray" on page 64
• "1020 Base cover assembly" on page 64
• "1080 Built-in battery" on page 72
74
T15 Gen 1 and P15s Gen 1 Hardware Maintenance Manual
b as shown in the following illustrations. Either too much or too less application of
2d
2b
2e
2a
2c