1210 System Board; 1010 Removing The Nano-Sim Card And The Nano-Sim-Card Tray - Lenovo ThinkPad T15 Gen 1 Hardware Maintenance Manual

Hide thumbs Also See for ThinkPad T15 Gen 1:
Table of Contents

Advertisement

Removal steps of the hall sensor board with cable

1210 System board

Important notices for handling the system board:
When handling the system board, read the following:
• The system board has an accelerometer, which can be broken when several thousands of G-forces are applied.
Note: Dropping a system board from a height of as little as 6 inches so that it falls flat on a hard bench can subject
the accelerometer to as much as 6000 G's of shock.
• Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or
composite.
• Avoid rough handling of any kind.
• At every point in the process, be sure not to drop or stack the system board.
• If you put a system board down, be sure to put it only on a padded surface such as an ESD mat or a corrugated
conductive surface.
For access, remove these FRUs in order:
• "1010 Removing the nano-SIM card and the nano-SIM-card tray" on page 64
.
Chapter 8
Removing or replacing a FRU
83

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkpad p15s gen 120s7s02u00

Table of Contents