Table of Contents
Advertisement
Removal steps of the memory module
When installing: Install the memory in the slot
Note: Memory module replacement might cause memory retraining during POST. When memory retraining
occurs, the screen might be blank. You might see the LED indicators on Esc, F1, and F4 blinking sequentially
to indicate the progress. Do not press the power button to interrupt the process. Wait a few minutes until the
logo screen is displayed.
1040 M.2 solid-state drive, bracket, and thermal pad
For access, remove this FRU:
• "Removing the nano-SIM-card and nano-SIM-card tray" on page 62
• "1020 Base cover assembly" on page 64
Attention: The M.2 solid-state drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data.
When handling the M.2 solid-state drive, observe the following guidelines:
• Replace the M.2 solid-state drive only for repair. The M.2 solid-state drive is not designed for frequent
changes or replacement.
• Before replacing the M.2 solid-state drive, make a backup copy of all the data that you want to keep.
• Do not apply pressure to the M.2 solid-state drive.
• Do not touch the contact edge or circuit board of the M.2 solid-state drive. Otherwise the M.2 solid-state
drive might get damaged.
• Do not make the M.2 solid-state drive subject to physical shocks or vibration. Put the M.2 solid-state drive
on a soft material, such as cloth, to absorb physical shocks.
66
ThinkPad P16v Gen 1 Hardware Maintenance Manual
a
first.
Advertisement
Table of Contents
