1040 M.2 Solid-State Drive (For 300W Gen 3 Only) - Lenovo 100w Gen 3 Hardware Maintenance Manual

Applying labels to the base cover assembly
Note: Depending on the country or region of delivery, the labels might be slightly different from the ones in
the following illustration.
The new base cover assembly FRU is shipped with a kit containing labels of several kinds. Apply those labels
when you replace the base cover assembly. For the labels that are not shipped with the new base cover
assembly, peel them from the old base cover assembly, and adhere them to the new one.
Table 6. All base cover labels
Label Label description
a
Rating label
b
Rating print label
c
IMEI label
d
Country label
e
Win10 GML label

1040 M.2 solid-state drive (for 300w Gen 3 only)

For access, remove these FRUs in order:
• "1010 Lenovo Integrated Pen (for selected models of 300w / 500w Gen 3)" on page 43
• "1020 Pen dummy (for selected models of 300w Gen 3 / 500w Gen 3)" on page 43
• "1030 Base cover assembly" on page 44
.
Chapter 5 Removing or replacing a FRU
45