Operating The Tenstem Eco Basic; Description Of The Device; Starting The Device - schwa-medico TENStem eco basic Instructions For Use Manual

10
schwa-medico Instructions for Use - TENStem eco basic

Operating the TENStem eco basic

Description of the device

All parameters can be adjusted via the keypad and are indicated on the large display.
1. Display
2. Menu keys
3. Modification keys to adjust
parameters
and intensities
4. ON/OFF key
5. Battery compartment
6. Output sockets for the cables
7. Belt clip (back side)
Keypad
to switch the device on and off
and to stop stimulation
P
to select a program
E
to set the parameters
to increase the intensity
(left for channel 1, right for channel 2)
to decrease the intensity
(left for channel 1, right for channel 2)
You cannot set the intensity of channel 1 and 2 at the same time.
Note:

Starting the device

Insert the batteries into the battery compartment (no. 5). Please also read the chapter
"Battery change" for more information. All symbols appear automatically on the display. An
acoustic signal indicates that the unit is ready for use.
1
4
3
5
6
7
2