Therapy" Mode; Edit" Mode; Setting Date And Time - schwa-medico TENStem eco basic Instructions For Use Manual

OFF" shows that the signal transmitter is switched off. Using the
transmitter can be switched on and off alternatingly. By pressing the
new setting will be saved. The device returns to the "Ready" mode.

"Therapy" mode

The LCD display shows the program, the remaining therapy time, the frequency, the pulse
width and the intensity.
1. Pressing the
"Ready" mode.
2. Press the left and the right
0 to 60 mA).
3. Press the left and the right
0 to 60 mA).
4. If the therapy time is over, the therapy is stopped and the TENStem eco basic returns
to the "Ready" mode.
"Edit" mode Only for devices from series C upwards:
The LCD display shows the program, frequency, pulse width and intensity. The therapy time
flashes. Pressing the left or right
minutes each (max. 90 minutes). Pressing the left or right
time in increments of five minutes each (max. 10 minutes). In programs 1-12, by pressing
E
the button or , the set time is saved and the "Edit" mode is exited.
In the programs 13-15 (and program 16 from series E) the mode to determine the therapy
frequency is entered by pressing the
left button increases the therapy frequency in increments of one hertz each (max. 120Hz).
Pressing the left button reduces the therapy frequency in increments of one hertz each
(min. 1Hz). Pressing the
pulse width flashes. Pressing the left
five microseconds each (max. 300μs). Pressing the left
increments of five microseconds each (max. 75μs). Pressing the button
parameters and the mode "Edit" is exited.
The TENStem eco basic switches off automatically if no button has been pressed for two
minutes. No changes will be saved.
Setting date and time Only for devices from series C upwards:
Before you can use the memory query mode you need to set the date and time. Pressing and
E
holding the key for about 3 seconds leads you to the date/time mode. In date/time mode
the LCD shows two figures: The left figure indicates the date, the right figure indicates the
time. Pressing the left
decreases the date by one day (min. 1).
button stops the therapy and the TENStem eco basic returns to the
buttons to determine the intensity of channel 1 (from
buttons to determine the intensity of channel 2 (from
button increases the therapy time in increments of five
E button. The therapy frequency flashes. Pressing the
E
button opens the mode for determination of the pulse width. The
button increases the pulse width in increments of
key increases the date by one day (max. 30). Pressing the left
E
button, the signal
button reduces the therapy
button reduces the pulse width in
E or
13
English
button the
saves the set
key