Table of Contents
Advertisement
3.5 The dimensions of ceiling bracket
3.6 Installation steps
a)
The length of the rail and the belt need to customize according to the size of the
window.
b)
Turn to the reverse side of the rail, put the Track Joiner to the rail.
c)
Turn to the forward side of the rail. Take the Belt, thread it into one of the rails (left
side), drag it to the Drive unit, then pull it out. At the end of the Belt, insert the Clamp1,
then plug the Fixture1.
left part
d)
Adjust the Belt's position of the Fixture1 (as shown in figure), and insert the Clamp2
to the other side of the belt, next to the Fixture1.
Fixture1
固定卡 1
left part
e)
Adjust the Belt's position, insert the Clamp3 between the Fixture1 and the Clamp2,
next to the Clamp2.
Curtain Motors – User Manual
Track Joiner
Clamp2
HDL-MWM70B.12/MWM70S.12
Clamp1
Fixture1
User Manual
Fixture1
6
Advertisement
Table of Contents
