Position Close Setting; Set The Curtain Mode - HDL Buspro -MWM70B.12 User Manual

6.5.2 Position close setting

a) Select "Drag NO Action" mode, Save and Upload, then manually drag the curtain
fabric to the limit position of curtain-close which is the end-user wants.
b) Select Close, then click OK, now the limit position of Close is saved, it is a new
different position from the detected limit position in Section 6.4.

6.6 Set the curtain mode

Curtain Motors – User Manual
HDL-MWM70B.12/MWM70S.12
Select drag mode
Set the safe distance
User Manual
14