Table of Contents
Advertisement
User Manual
HDL-MWM70B.12/MWM70S.12
Operation: With only one button, you can control the curtain's open, close and stop.
6.9 Easy programming mode
Long press the button 10s, the LED will turn OFF 2 times per 2s to indicate the curtain. It
has entered into easy programming mode.
Now, the panel appears "programming", then keep pressing the page up, page down
button (button 9 and 10) of DLP switch together, the panel will appears "external
programming".
In this mode, you can control the curtain by PROG button, and switch panel can record
the status from curtain motor by long press or short press buttons in panel. Long press the
panel's button, it will cover the original targets and it is only controlling the curtain. Short
press the button, it will add the curtain control.
Long press the button of motor for 10s, it can exit this status. If it is no action, it will exit
automatically after 20min without operation.
This function is to be used with new generation of DLP, HDL-MPL8.48.
7. FAQ
7.1 CurtainFAQ001_Buspro
Q:
How does the Master Motor control the Slave Motor?
A:
The Master is connected to the HDL Buspro port and AC220V, and it provides DC12V to
the Slave motor by the RJ11 6p6c. When the Master is forwarding or reversing, will control
the Slave via the RJ11 line at the same time.
7.2 CurtainFAQ002_Buspro
Q:
Are all fixing accessories provided by HDL?
A:
No, HDL just provides the Ceiling Brackets (See section 3.4), you need to find other fixing
rd
accessories from 3
party providers.
Curtain Motors – User Manual
17
Advertisement
Table of Contents
