User Manual
HDL-MWM70B.12/MWM70S.12
6.8 Panel Setting
The curtain can be controlled by 2 different kinds of commands.
1:The button's setting as following. (HDL-BUS software)
Operation:
Long press the button, open or close the curtain, when loosen the button, it will stop
running (If the curtain reaches the fully open or close position, and you have not loosen
the button, it will stop automatically for protection.)
Short press the button, it will go to the desired position, 45%. Short press again, the
curtain will stop.
2:The button's setting as following. (HBST software)
Curtain Motors – User Manual
16