Notice; Connecting - HDL Buspro -MWM70B.12 User Manual

Bus enabled motorized curtain
Table of Contents

Advertisement

Built-in a new generation of clutch, system operating noise no more than 40dB
The curtain's horizontal pull reaches 8KG
Use HDL-BUS port as interface, DLP panel to control the curtain, easy to use

3.2 Notice

Read all instructions in detail before use
Non-Contact with the liquids or inflammable gas and object when using
Make sure there is no short-circuits or wiring errors before power on
Power off before install and uninstall
When install the motor to the drive unit, please check and make sure that the latch
has switched back to the locket position.
After the installation, please don't pull the curtain forcibly, don't put any additional
weight on the curtain rail; please don't climb the curtain or hang anything on it;
otherwise the rail and the motor will fall down then lead to personal injury and product
damage
Pay attention to water-proof, steam-proof
Please use the dry cloth to wipe when cleaning, can't use the damp or corrosive stuff
for wiping
Has any abnormal situation, please stop the operation and turn off the power, then
contact with the technical service or our company

3.3 Connecting

Please follow the connecting showed below strictly.
Drive Unit
Ceiling Bracket
Fixed Hole
Hook Unit
RJ11 Cable
Curtain Motors – User Manual
HDL-MWM70B.12/MWM70S.12
Rail
Carrier
User Manual
Drive Unit
Ceiling Bracket
Roller Runner
Latch
RJ11 Cable
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Buspro hdl-mwm70s.12

Table of Contents