Automatic detection (see Section 6.4)
Installation mode length
6.5 Set position of open and close
6.5.1 Position open setting
①
a) Select Drag NO Action mode, then manually drag the curtain to the limit position of
curtain-open which is the end-user wants.
b) Select Open, then click OK, now the limit position of Open is saved, it is a new
different position from the detected limit position in Section 6.4.
Curtain Motors – User Manual
②
③
HDL-MWM70B.12/MWM70S.12
User setting (see Section 6.5)
User run-time length
User Manual
13