Sleep Group Setting - HDL Prism Pro User Manual

Prism Pro/Multi-function Touch Panel User Manual

8 Sleep Group Setting

Select "Sleep group setting" label in the panel configuration page, as shown in Figure 8-1.
Sleep control: after the panel receives sleep command, the panel LED and LCD will enter/exit
sleep status. Sleep control includes group ID and sleep brightness. After the panel enables
sleeping and the sleep group is selected, sleep control command can be received.
This chapter takes "When panel A enters sleep status, panel B and C will enter at the same
time" as an example.
User may select "Allow sleep" and sleep group 1 in the sleep group setting of panel A/B/C.
Panel A/B/C will belong to sleep group 1 and click "save". When panel A enters sleep status,
other panels in the same group will enter sleep status as the same time (here refers to panel
B and panel C).
Figure 8-1 Sleep group setting
HDL Automation Co., Ltd.
http://www.hdlchina.com 28