Test; Other Function Setting; Ac Setting; Temperature Model Setting - HDL Prism Pro User Manual

4.2 Test

Set AC ON/OFF, fan speed, mode (cooling, heating, auto and dry), unlock and swing (Mark
② of Figure 4-1).
For example, select "ON" to enable AC, set fan speed to "High", set mode to "Heating" and
the temperature to 28℃, and save. If configured successfully, the AC page should display
"High/Heating/28℃".

4.3 Other Function Setting

In other function setting part (Mark ③ of Figure 4-1), user may configure AC setting, IR codes
and Slave & sync.

AC Setting

4.3.1
Click "Setup" button in AC setting page, user may set temperature model, temperature range
and temperature sensor, as shown in Figure 4-2.

4.3.1.1 Temperature Model Setting

Figure 4-2 shows the setting items below:
➢ FAN: to enable 4 fan modes.
➢ Mode: to enable 5 working modes.
➢ Eco mode: to enable/disable eco mode. If eco mode is enabled, when ambient
temperature is to the specific temperature, the panel will automatically turn off fan to
save energy.
Note: eco mode is invalid for fan/dehumidfy mode.
➢ Swing: to enable/disable swing. After enabling swing, swing status can be switched.
HDL Automation Co., Ltd.
http://www.hdlchina.com
Prism Pro/Multi-function Touch Panel User Manual
16