Page 3
Prism Pro/Multi-function Touch Panel User Manual Floor Heating Setting ....................... 21 Music Setting ........................... 24 LED Setting ..........................26 LED Color & Shortcuts Setting ..................26 LED White Balance Adjustment..................27 Sleep Group Setting ........................ 28 HDL Automation Co., Ltd.
Prism Pro/Multi-function Touch Panel User Manual Legal Statement HDL has all the intellectual property rights to this document and contents thereof. Reproduction or distribution for third parties are prohibited without written authorization from HDL. Any infringement of HDL’s intellectual property rights will be investigated the legal liability.
Prism Pro/Multi-function Touch Panel User Manual Update History The form below contains the information of every update. The latest version contains all the updates of all former versions. Version Update Information Date V1.0.0 Initial release Nov.22, 2019 HDL Automation Co., Ltd.
In addition, it can be woken by presence detection. This user manual offers the information on the configuration of Prism Pro in Buspro Setup Tool 2. The following tools might be included: ➢...
Page 7
Prism Pro/Multi-function Touch Panel User Manual Figure 1-1 Panel button introduction ➢ Open Configuration Page ① Connect the panel to the system and open Buspro Setup Tool 2 in the computer. ② Click “Fast Search” to search for the devices.
Prism Pro/Multi-function Touch Panel User Manual 2 Panel Setting Default panel setting page appears as shown in Figure 2-1. The setting items include: ① Button page settings: to display/hide corresponding button pages. ② Return standby page: the panel can be set to return to a specific page after a period of time with no operation.
Prism Pro/Multi-function Touch Panel User Manual 2.1 Button Page Display Setting In “Button page settings” part (as shown in Figure 2-2), user may select/deselect corresponding button page to display/hide. Note: user should at least display a button page instead of hiding all.
Prism Pro/Multi-function Touch Panel User Manual 2.2 Return Standby Page Setting In “Return standby page” setting part (as shown in Figure 2-3), the panel can be set to return to a specific page after a period of time with no operation.
Prism Pro/Multi-function Touch Panel User Manual 2.3 Temperature Feedback Setting After Prism Pro detects temperature via built-in temperature sensor, temperature broadcasting can be enabled/disabled in “Temperature feedback” setting part (as shown in Figure 2-4). 1. Broadcast: to enable/disable temperature broadcasting.
Prism Pro/Multi-function Touch Panel User Manual 2.4 Proximity Sensor Setting In “Proximity sensor” setting part (as shown in Figure 2-5), user may set proximity sensor. 1. Proximity sensor enable: to enable proximity sensor, namely the panel will be woken up by detecting human body.
Prism Pro/Multi-function Touch Panel User Manual 2.5 Indicator Intensity Setting In “Indicator intensity” setting part (as shown in Figure 2-6), user may set indicator brightness. 1. LCD backlight: to set panel backlight brightness. 2. Button LED: to set button indicator brightness.
Prism Pro/Multi-function Touch Panel User Manual 2.6 Other Settings (Button Valid Status) In “Others” setting part (as shown in Figure 2-7), user may set button valid status. Figure 2-7 Others setting (button valid status) The setting items are explained below: 1.
Page 15
Prism Pro/Multi-function Touch Panel User Manual ➢ Customized Language Setting User may customize language by uploading premade icons to replace default panel icons, as shown in Figure 2-8. ① Click “Apply” button in Buspro Setup Tool 2 ② Select “Image” label ③...
Prism Pro/Multi-function Touch Panel User Manual 2.7 Time and Date Setting In “Time and date” setting part (as shown in Figure 2-9), user may select time type and date format. Because time and date only appear in the standby page, the panel can be set to return to page 10 after a period of time with no operation (the standby page number is 10) in “Return...
Prism Pro/Multi-function Touch Panel User Manual 3 Button Setting 3.1 Button Objects Setting Select “1 to 6 Pages” label in the panel configuration page and select buttons to be set at the top. Click “Targets setting” button on the right, as shown in Figure 3-1.
Prism Pro/Multi-function Touch Panel User Manual Add Objects 3.1.1 User should select the button mode of controlling several objects to add objects. For example, several objects can be controlled by “Combination ON”, “Combination OFF”, “Combination ON/OFF”, “Dbclick/Combined”, “Short/Long Press” or “Short Press/Long Jog”. This part takes adding 3 objects to “Combination ON”...
Page 19
Prism Pro/Multi-function Touch Panel User Manual combination mode supports mutual exclusive function). ⑤ Double key: to select whether continuous two buttons are combined as a button to use, the objects of combined button are those of smaller button. For example, after combining button 1 with button 2, the objects of combined button are those of button 1.
Prism Pro/Multi-function Touch Panel User Manual 4 AC Setting Select “AC” label in the panel configuration page, as shown in Figure 4-1. Figure 4-1 AC setting 4.1 General Setting Select “Enable” at the top of AC setting part (Mark ① of Figure 4-1) to enable AC.
Prism Pro/Multi-function Touch Panel User Manual 4.2 Test Set AC ON/OFF, fan speed, mode (cooling, heating, auto and dry), unlock and swing (Mark ② of Figure 4-1). For example, select “ON” to enable AC, set fan speed to “High”, set mode to “Heating” and the temperature to 28℃, and save.
Prism Pro/Multi-function Touch Panel User Manual Figure 4-2 Temperature model setting 4.3.1.2 AC Temperature Range Setting As shown in Figure 4-3, the minimum/maximum temperature in 4 work modes can be set in “Temperature range” page, whose ranges are both from 0 to 30℃.
Prism Pro/Multi-function Touch Panel User Manual 4.3.1.3 Temperature Sensor Setting Figure 4-4 shows the setting items below: ➢ Internal: the panel refers to the temperature data obtained by built-in temperature sensor. ➢ External: the panel refers to the temperature data obtained by external temperature sensor.
➢ Synchronous Control (Invalid for Additional AC Page) When several panels control the same AC, user need to set synchronized panel information before synchronizing other panels. Prism Pro can synchronize the AC information of up to 8 panels. Click “Slave & Sync” button in AC setting page and select “Synchronous Control” label, as shown in Figure 4-6.
Page 25
Prism Pro/Multi-function Touch Panel User Manual Figure 4-6 Synchronous control setting HDL Automation Co., Ltd. http://www.hdlchina.com...
Prism Pro/Multi-function Touch Panel User Manual 5 Floor Heating Setting Select “Floor heating” label in the panel configuration page, as shown in Figure 5-1. Figure 5-1 Floor heating setting The setting items are explained below: ① Device information: to select the working mode and control mode of floor heating.
Page 27
Prism Pro/Multi-function Touch Panel User Manual Feedback” or “Ask Feedback”, user may set the subnet ID, device ID and channel of external sensor. ➢ Average of In & Out: the panel refers to the average of temperature from internal and external sensor, the temperature of up to 2 external sensor can be referred to at a time.
Page 28
Prism Pro/Multi-function Touch Panel User Manual 5. Sync mode: to select to synchronize the floor heating working mode of other panels. 6. Sync ON/OFF: to select to synchronize the floor heating ON/OFF status of other panels. 7. Sync temperature: to synchronize the floor heating temperature of other panels.
Prism Pro/Multi-function Touch Panel User Manual 6 Music Setting Select “Music” label in the panel configuration page, as shown in Figure 6-1. Figure 6-1 Music setting The setting items are explained below: ① Settings: ➢ Enable/Disable: to enable/disable music function.
Page 30
Prism Pro/Multi-function Touch Panel User Manual ➢ Zone No. (1-24): to select music device zone number, which ranges from 1 to 24, the default value is 1. ➢ Subnet ID: the subnet ID of music device. ➢ Device ID: the device ID of music device.
Prism Pro/Multi-function Touch Panel User Manual 7 LED Setting 7.1 LED Color & Shortcuts Setting Select “LED color & shortcuts” label in the panel configuration page, as shown in Figure 7-1. ① LED color: to set button LED color in on/off state.
Prism Pro/Multi-function Touch Panel User Manual 7.2 LED White Balance Adjustment Select “LED white balance adjust” label in the panel configuration page, as shown in Figure 7-2. When button LED color differentiates from standard white, user need to set button LED color to standard white in “LED color &...
Prism Pro/Multi-function Touch Panel User Manual 8 Sleep Group Setting Select “Sleep group setting” label in the panel configuration page, as shown in Figure 8-1. Sleep control: after the panel receives sleep command, the panel LED and LCD will enter/exit sleep status.