Inverter Info." Menu Area (Current Settings); Settings - Delta Electronics RPI M6A Installation And Operation Manual

8 Settings

"Inverter info." menu area (current settings)

8.2 "Inverter info." menu area (current set-
tings)
Overview
This function allows you to display the current inverter settings.
Setting options
None.
Menu item path
Main menu > Inverter Info.
Displaying the inverter information
1 0 . N o v 2 0 1 9 1 5 : 3 2
S t a t u s : O n G r i d
P o w e r :
E - T o d a y :
M e t e r
E n e r g y L o g
E v e n t L o g
I n v e r t e r I n f o .
Overview of displayed information
Displayed information
S / N : x x x x x x x x x x x x x
I n s t a l l 1 8 / 0 9 / 2 0 1 9
D S P 1 . 4 8 R E D
C O M M 1 . 3 2 I D :
74
1.
When the default information is displayed, press any button to open the main menu.
Otherwise, press the
0 W
0 k W h
2.
Use the
button.
ENT
3.
Use the
Note: Some list items contain sub-items with additional information.
4.
Press the
ESC
Description
S/N: xxxxxxxxxxxxx
The 13-character serial number of the inverter.
The serial number is also located on the type
1 . 1 5
plate of the inverter.
1
Install
The installation date of the inverter
DSP 1.48, RED 1.15, COMM 1.32
The version numbers of the installed firmware.
This manual relates to the three firmware ver-
sions listed here.
ID: 1
The inverter ID. This is required in order to
uniquely identify an inverter when several
inverters are installed in a system.
button repeatedly until the main menu is displayed.
ESC
and buttons to select the Inverter Info. entry and then press the
and buttons to page through the list.
button to exit the menu.
Installation and Operation Manual for Power Inverter RPI M6A M8A M10A EU V4 EN 2020-07-13
How can I change this setting
This setting cannot be changed.
This setting cannot be changed.
This setting cannot be changed.
See "8.4 "Installation settings" menu area,
page 80 for a detailed description and how
to change the settings