Table of Contents
Advertisement
6.8
Attaching warning labels to the inverter
► Attach all necessary warning labels to the inverter. Always
follow the local regulations.
Some examples of warning labels are listed below.
Do not work on this equipment until it is located
WARNING
from both mains and on site generation supplies.
Dual supply
Isolate on-site Generation Unit(s) at ____________________________________
Isolate mains supply at _____________________________________________
Warning - Only persons authorized by DNO may remove the main cut out fuse
Warning
Two voltage sources present
- Distribution network
- PV modules
6.9
Connecting a PC via RS485
Inverter
DATA+ Terminal 3 or 5
DATA– Terminal 4 or 6
Installation and Operation Manual for Power Inverter RPI M6A M8A M10A EU V4 EN 2020-07-13
Isolate both sources before
carrying out any work
USB/RS485 adapter
D+
D–
6 Installation
Connecting the solar modules (DC)
71
Advertisement
Table of Contents
