Cancelling A Programme; At The End Of A Programme; Automatic Keeping Warm Function; Quick Microwave - Miele M 2240 SC Operating Instructions Manual

Operation
of 30 seconds when the microwave is
being used at the maximum power
level).

Cancelling a programme

 Touch the Stop/C sensor twice.

At the end of a programme

A signal tone will sound when the
cooking programme is complete. The
interior lighting goes out.
The signal tone will sound briefly as a
reminder every 5 minutes for
20 minutes after the end of the
programme.
 If you want to stop the signal tone,
touch the Stop/C sensor.
Automatic keeping warm
function
The keeping warm function will switch
on automatically after the end of a
cooking programme which has used at
least 450 W, providing the door remains
closed and no sensors are touched.
After approx. 2 minutes the keeping
warm function will switch on at 80 W for
a maximum period of 15 minutes.
, 80 W and H:H will light up in the
display.
Opening the door or operating one of
the sensors while the keeping warm
function is in progress cancels the
function.
The keeping warm function cannot be
set separately.
You can deactivate this function (see
"Changing settings").
34

Quick microwave

Touching the Start/ sensor is
sufficient to set the appliance operating
at maximum power for one minute.
 Touch the Start/ sensor.
If no further selection is made, the
microwave will operate at maximum
power for one minute.
The cooking duration can be increased
by touching Start during operation.
Each time it is touched, the cooking
duration is increased by another
30 seconds.
Changing the duration and power
level
You can change the preset duration and
power level and save this as one of your
main applications.
At the 300 W power level a maximum
duration of 10 minutes can be saved.
From 450 W a maximum duration of 5
minutes can be saved.
 Touch the  sensor.
P1 will appear in the display.
 Use the arrow sensors to select P 8.
 Confirm your selection with OK.
 Change the power level and confirm
with OK.
 Change the duration and confirm with
OK.
 If you do not want to change a
setting, touch the OK sensor.
 When you have finished changing
appliance settings, touch the Stop/C
sensor.