Table of Contents
Advertisement
Signal formats
3840×2160/29.97p, 30p
4:2:2 YCbCr 8-bit
4) 5)
3840×2160/50p
4:2:0 YCbCr 8-bit
3840×2160/59.94p, 60p
4:2:0 YCbCr 8-bit
4) 5)
4096×2160/25p
4:2:2 YCbCr 8-bit
4096×2160/29.97p, 30p
4:2:2 YCbCr 8-bit
4) 5)
4096×2160/50p
4:2:0 YCbCr 8-bit
4096×2160/59.94p, 60p
4:2:0 YCbCr 8-bit
1) HDMI is determined automatically via the sync signal.
HDCP is not supported. Transmission and display of signals on which copy guard signals are embedded are not possible.
2) DVI is determined automatically via the DE (Data Enable) signal.
HDCP is not supported. Transmission and display of signals on which copy guard signals are embedded are not possible.
3) 1920×1080 will be transmitted as 4:2:2 YCbCr 10-bit (valid 8-bit).
3840×2160 and 4096×2160 will be transmitted as 4:2:2 YCbCr 10-bit (valid 4:2:0 YCbCr 8-bit).
4) Supported only when connected to devices that output YCbCr 4:2:2 images.
The colors of images are not output correctly if the input is not YCbCr 4:2:2.
5) 3840×2160 or 4096×2160 video signals input at 25p or 29.97p are converted to the transmission format on the transmitter side before
transmission.
The frame rate is converted for 3840×2160 or 4096×2160 video signals that are input at 25p or 29.97p. Always check the image quality
before starting a medical procedure. If there is any problem, do not use the unit.
Note
Configure the system frequency settings on the unit according to the frame frequency of the input video signal (page 19).
If the settings do not match, frame skipping or repeating, audio noise, and other errors may occur.
Analog signals
Input video
Signal formats
VIDEO
NTSC-M/J(358)
Yes
PAL-M/PAL60
Yes
PAL-N/BG
Yes
720×487/59.94i
No
720×483/59.94p
No
720×576/50i
No
720×576/50p
No
1280×720/50p
No
1280×720/59.94p
No
1920×1080/50i
No
1920×1080/59.94i
No
1) When the supplied NUA-AA10 analog adapter and the SMF-405 signal cable (not supplied) are attached.
2) Transmitted as 4:2:2 YCbCr 10-bit (valid 8-bit).
3) Transmission and display of signals on which copy guard signals are embedded are not possible.
Note
Configure the system frequency settings on the unit for each input video signal format (page 19). If the settings are not
configured properly, an error will occur.
Input connectors
1)
HDMI
Yes
Yes
Yes
Yes
Yes
Yes
Yes
1)
Component
3)
3)
S VIDEO
YCbCr
Yes
No
Yes
No
Yes
No
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
System frequency setting
2)
DVI
No
59.94 Hz/60 Hz
No
50 Hz
No
59.94 Hz/60 Hz
No
50 Hz
No
59.94 Hz/60 Hz
No
50 Hz
No
59.94 Hz/60 Hz
3)
System frequency setting
RGB
No
59.94 Hz/60 Hz
No
No
50 Hz
Yes
59.94 Hz/60 Hz
Yes
Yes
Yes
50 Hz
Yes
Yes
59.94 Hz/60 Hz
Yes
50 Hz
Yes
59.94 Hz/60 Hz
32
3)
Transmission format
3840×2160/59.94p
3840×2160/50p
3840×2160/59.94p
4096×2160/50p
4096×2160/59.94p
4096×2160/50p
4096×2160/59.94p
2)
Transmission format
1920×1080/59.94p
1920×1080/50p
1920×1080/59.94p
1920×1080/50p
1920×1080/59.94p
1920×1080/50i
1920×1080/59.94i
Advertisement
Table of Contents
