Arctic Spas Custom Series Owner's Manual page 14

Owners Manual - Arctic Spas®
9) Test and Adjust Sanitizer level (Helth Canada mandates 3 - 5 ppm for residential Hot Tubs Spas).
10) Rotate diverters to centre position and press "Pump 2" button on topside control panel for 5
seconds to activate the "Boost filtration system". When this system is enabled, "boo"
is displayed on the screen. This will give 45 min of circulation and filtration to disperse the
chemicals.
CAUTION!
Do Not turn on
power to the spa
until the spa is filled
to the required
level. Running the
spa pump without
water could cause
immediate damage
and void your
warranty!
CAUTION!
If your spa or AWP is equipped with Spa Boy or
ONZEN please consult the: Spa Boy Owners
Manual or ONZEN User Guide for further setup
requirements.
14 14