Arctic Spas Custom Series Owner's Manual page 120

Owners Manual - OnSpa®
2020 Connecting the Linux Pack using Built-In WiFi
6.1 - Set up a new connection
The 2020 Spa's AP (Access Point) should automatically
launch when the Spa is first powered up.
If the Spa's Access Point didn't automatically come up,
you can manually launch it.
To set up the Spa's Access Point 'AP' press and hold the
pump 3 button on the topside until the display reads 'AP'
then release. The AP is up when APUP is displayed on
the screen.
(PLEASE NOTE: This will be the 'BLOWER' button if the
spa hasn't received the new topside overlay yet).
Next "APUP" will display, telling us the Spa's Access
Point is now discoverable.
On device, exit the app screen and go into set-
tings > Wifi > MyArcticSpaAP.
The password for this connection is:
1234567890
Join the Hotspot.
Re-open the Arctic Spa app and press CONTINUE
120 120