Blocking Channels; Unlocking Programs Temporarily; Using The Input Lock Feature - Toshiba 19AV600U Owner's Manual

Blocking channels

With the Channels Block feature, you can block specific
channels. You will not be able to tune blocked channels unless
you unlock them.
To block channels:
1
and highlight the Locks menu icon.
Press
2
Press to display the PIN code entering screen.

3
Enter your four-digit PIN code and press
( page 39).
4
to highlight Channels Block and then press
Press

. A list of the channels available for that input will be
displayed along with the call letters for each channel, if
available.
5
Press to highlight the channel you want to block

and press , which puts an " " in the box next to that
channel.
6
Repeat step 5 for other channels you want to block.
7
Highlight Done and press
To unblock individual channels:
In step 5 above, press to highlight the channel you want

to unblock, press to remove the " " from the box, highlight
Done and press
.
To block all channels at once:
Highlight Block All in step 5 on previous page and then
highlight Done and press
.
To unblock all locked channels at once:
Highlight Allow All in step 5 on previous page and then
highlight Done and press
.
Chapter 6: Using the TV's features
.

Unlocking programs temporarily

If you try to tune the TV to a program that exceeds the rating
limits you set, the TV will enter program lock mode and the
following message will appear on-screen:
This program exceeds the rating limit you set.
Push 'MUTE' to enter PIN.
You can either temporarily unlock the program or select an
unlocked program to watch.
To temporarily unlock the program:
1
Press .
2
Enter your four-digit PIN code and press
code is entered, the program lock mode is released and
the normal picture appears. All locking is disabled until
the TV is turned off, and will be enabled when the TV is
turned on again.

Using the input lock feature

You can use the Input Lock feature to lock the video inputs
(VIDEO 1, VIDEO 2, ColorStream HD-1, ColorStream HD-2,
HDMI 1, HDMI 2 and PC) and channels 3 and 4. You will not be
able to view the input sources or channels until you unlock the
inputs.
To lock/unlock the video inputs:
1
From the Locks menu, Press
entering screen.
2
Enter your four-digit PIN code and press
3
to highlight Input Lock and press
Press

4
Press or to select the level of video input locking
 
you prefer, as described below.
Mode Description
Locks VIDEO 1, VIDEO 2,
Video ColorStream HD1/HD2, HDMI 1,
HDMI 2, and PC.
Locks VIDEO 1, VIDEO 2,
ColorStream HD1/HD2, HDMI 1,
Video+
HDMI 2, PC and channels 3 and 4.
Select Video+ if you play video
•
tapes via an ANT/CABLE input.
Unlocks all video inputs and channels
Off
3 and 4.
5
Press .
. If the correct
to display the PIN code

.
.

41