Table of Contents
Advertisement
4
Press
or
to select the desired label for that input
source. If a particular input is not used, you can select
Hide as the label, which will cause that input to be "grayed
out" in the Input Selection screen and skipped over when
you press
on the remote control.
5
To save the new input labels, highlight Done and
press
.
To revert to the factory default labels, highlight Reset and
press
.
Input labeling example:
The screen below left shows the default Input Selection
screen (with none of the inputs labeled as a specific device).
The screen below right is an example of how you could label
the inputs if you connected a VCR to VIDEO 1, Cable TV to
VIDEO 2, a video recorder to ColorStream HD1, a DTV set-
top box to HDMI 1, and a satellite/DSS set-top box to HDMI 2.
Also note that the ColorStream HD2 input is labeled "Hidden",
which means that input will be skipped over when
pressed.
Input Selection screen with
no inputs labeled.
To clear the input labels:
1
and open the Preferences menu.
Press
2
Highlight Input Labeling and press
3
Highlight Reset and press
Chapter 6: Using the TV's features
is
Input Selection screen with
all inputs labeled except input 4,
which has been hidden.
.
.
Tuning channels
Tuning channels using the
Channel Browser ™
The Channel Browser™ provides an easy navigation interface
for all your channels and inputs. This feature allows you to:
Navigate the contents of all of your inputs.
•
Keep a list of your favorite channels (see "Favorites
•
Browser," below).
Keep a history of the last 32 channels or inputs viewed.
•
Quickly surf and tune your recently viewed channels/inputs
•
from the Channel Browser™ History List (illustrated on
the next page).
Surf via Browse mode (to immediately tune channels as
•
you highlight them in the Channel Browser™) or Select
mode (to surf over channels in the Channel Browser™
before you select one to tune).
Quickly change inputs from the Inputs List.
•
Quickly select REGZA-LINK devices from the REGZA-
•
LINK List.
Favorites Browser
The Favorites Browser allows you to quickly set up a favorite
channels/inputs list that is integrated into the Channel Browser™.
To add a favorite channel/input:
1
Tune to the channel or input.
2
Press and hold
Note: Additions are added to the beginning of the Favorites
list on the left side of the Channel Browser™.
To delete a favorite channel/input:
1
Press
to open the Favorites browser list.
2
Highlight the channel or input to delete by pressing
or
.
3
Press and hold
for 3 seconds. The channel/input will
be removed from the Favorites list.
for 3 seconds.
29
Hide quick links:
Advertisement
Table of Contents
