Overview of steps for installing,
setting up, and using your new TV
Follow these steps to set up your TV and begin using its many
Carefully read the important safety, installation, care,
and service information. Keep this manual for future
Observe the following when choosing a location for the
Read "Important notes about your LCD TV"
( page 6).
Place the TV on the floor or a sturdy, level, stable
surface that can support the weight of the unit. Secure
the TV to a wall, pillar, or other immovable structure
( page 3).
Place the TV in a location where light does not reflect
on the screen.
Place the TV far enough from walls and other objects
to allow proper ventilation. Inadequate ventilation may
cause overheating, which will damage the TV. THIS
TYPE OF DAMAGE IS NOT COVERED UNDER
THE TOSHIBA WARRANTY.
Do not plug in any power cords until AFTER you have
connected all cables and devices to your TV.
BEFORE connecting cables or devices to the TV, learn
the functions of the TV's connections and controls
( pages 10–11).
Connect your other electronic device(s) to the TV
( pages 12–18).
Install the batteries in the remote control ( page 19).
See "Learning about the remote control" ( page 20) for
an overview of the buttons on the remote control.
AFTER connecting all cables and devices, plug in the
power cords for your TV and other devices. Then press
POWER on the TV control panel or remote control to turn
on the TV. If the TV stops responding to the controls on
the remote control or TV control panel and you cannot
turn the TV off or on, please unplug the power cords few
seconds then re-plug to try again.
Chapter 1: Introduction
See "Menu layout and navigation" for a quick overview
of navigating the TV's menu system ( page 21).
Program channels into the TV's channel memory
( page 24).
For details on using the TV's features, see Chapters 6
For help, refer to the Troubleshooting Guide, Chapter 8.
For technical specifications and warranty information,
see Chapter 9.
Enjoy your new TV!