Using your PC with the TV
Adjusting the image
If the edges of the picture are hidden, readjust
Horizontal Position and Vertical Position. If the
picture is affected by interference, readjust Clock
Phase and Sampling Clock.
1
Select PC input mode (- "Selecting the video input
to view" on p. 34).
2
> Settings > PREFERENCES > Display
Settings >
.
O K
3
Press B or b to select PC Settings. Press
Note: If a PC is not connected or there is no PC input
signal, this menu will not be available.
4
Press B or b to select an item.
5
Press C or c to make adjustments.
Note: The screen is disrupted momentarily when
adjusting the PC settings. This is not a sign of
malfunction.
Mode
Description
Horizontal
Moves the picture left/
Position
right.
Vertical
Moves the picture up/
Position
down.
Helps to reduce noise
Clock Phase
and sharpen the picture.
Helps to reduce noise
Sampling
and minimize periodic
Clock
vertical stripes on the
screen.
* The default settings and /or adjustment ranges vary
depending on the input signal format.
To reset PC Settings:
Select Reset. Press
.
O K
Setting the PC audio
You can output sound from your PC when connecting
it to your TV, using the AUDIO IN terminal and PC
audio cable.
1
> Settings > PREFERENCES > AV
Connection >
.
O K
2
Press B or b to select Rear Shared Audio.
3
Press C or c to select PC.
Note: Set Shared PC Input to PC to make the PC item
selectable (- p. 30).
42
Chapter 6: Basic features
Setting the timer to turn on the TV
You can set the on timer to turn on the TV to a preset
channel or input at a preset time.
To activate the timer:
1
(Another:
2
Press B or b to select Enable On Timer.
3
Press C or c to select On.
Note: If the Enable On Timer is set to Off, other menus
under On Timer cannot be changed.
.
OK
To set the timer:
1
2
Set these options to your preference:
Adjustment range
within ±10 from
center.*
within ±10 from
center.*
within ±15 from
center.
3
Select Done. Press
within ±5 from
Note: If you do not operate the TV for 1 hour after it is
center.
powered on by the On Timer feature, it turns off.
To cancel the timer:
1
2
Press B or b to select Enable On Timer.
3
Press C or c to select Off.
> Settings > APPLICATIONS > On Timer >
.
O K
> Timer > On Timer >
> Settings > APPLICATIONS > On Timer >
.
O K
Item
Description
Input
Video input source.
Channel
Channel to view.
Volume
Volume level.
Desired length of time until the TV
turns on.
Time until
minimum= 00:10, maximum= 12:00
Power On
Press C or c.
•
Use the number buttons.
•
.
OK
> Settings > APPLICATIONS > On Timer >
.
O K
.)
O K