Bosch Sensortec"|
Application Board 3.0 User Guide
7 Getting started
Setup overview
It is recommended to use an ESD safe environment to operate the Application Board 3.0 as depicted in the image.
Figure 7 Application Board 3.0 setup
Connecting a Shuttle Board 3.0 board
Make sure that the pins are aligned correctly to avoid damaging the connector or bending the pins.
Figure 8 Aligning the pins of the Shuttle Board 3.0 board
Modifications reserved | Data subject to change without notice
15 | 22
Document number: BST-DHW-AN008-00
Need help?
Do you have a question about the Sensortec Application Board 3.0 and is the answer not in the manual?