Royal ER-145 Manual page 29

STEP EIGHT:
The data input for Program Two 'PGM-2" is now complete Press
the [AMT TEND/TOTAL] key to enter the programmed data into the
register for a tape readout
PROGRAM EXAMPLE
PRESS
[AMT TEND/TOTAL]
NOTE If it is necessary to change any portion of the 'PGM-2"
program it is not necessary to re enter the entire program Simply
turn the control lock to the "PGM-2" position re enter the program
step you wish to change then press the [AMT TEND/TOTAL] key to
re enter the programmed data and to obtain a revised program
printout
INITIAL SETUP AND PROGRAMMING
DISPLAY
entered into step 7
—
sample
Number