Royal ER-145 Manual page 25

STEP FOUR:
Register Number — A register number can be programmed to appear on all receipts and on the X and Z reading printouts Only a two digit
register number can be used (0 99) If you only have one register in your store and do not wish to number it you can skip over this step and
go on to step five
Press the appropriate numbers on the keyboard then press the [VOID] key
PROGRAM EXAMPLE
PRESS
STEP FIVE:
Date — The correct date can be programmed into the register If selected as an option in Step 2 of Program One the date will be printed on
all transaction receipts and also on the X and Z readings The date needs to be programmed only once After the initial setting the date will
automatically change every 24 hours In addition the register is pre programmed with a permanent four year calendar The month will
automatically change after the last day of each month taking into consideration the varying number of days in each month
The date must be entered in the following sequence year month date Any single digit numbers for the month and day must be preceded by
To program the date press the appropriate numbers on the keyboard then press the [CHARGE] key
PROGRAM EXAMPLE
PRESS
840618 [CHARGE]
NOTE Disregard decimal point If you choose to program date time
must also be programmed to ensure date rollover
INITIAL SETUP AND PROGRAMMING
The register number 12 is selected
DISPLAY
12 [VOID]
DISPLAY
840618