Compak CUBE TAMP Instruction Manual page 5

If it is necessary to access the
interior, where the electrical
components are located, go to
the nearest technical service centre.
If any component should break,
or if any intervention is needed,
we recommend contacting the
technical service centres, which will carry
out the repair or replacement, guaranteeing
that safety standards are adhered to.
Only an authorised supplier
may replace the mains cable of
any machine.
NOTE: The manufacturer will not be liable for damages caused either by the
improper use of the device or by not following the stated safety measures
ORIGINAL INSTRUCTIONS | Ref.quality process 002/03 | v. 22/12/2020 | K08021H05
USERS SHOULD PAY SPECIAL
ATTENTION TO AND SCRUPULOUSLY
OBEY THE FOLLOWING SAFETY
maintainer. The use of suitable gloves
when handling it is recommended.
1.
SAFETY
INSTRUCTIONS
Any other use will be
considered improper
and dangerous
When maintaining the coffee
tamper, special care should
be taken as it could cut the
Do not insert any part of the
body between the coffee
tamper and the holder.
5